CONTENTS

INTRODUCTION

SECTION 1 ProGold
Convoluted PTFE Hose and End Fittings

SECTION 2 Smooth Bore
PTFE Hose and End Fittings

SECTION 3 Adaptors

SECTION 4 Firesleeve, Ducting, Breathers,
Bleed and Fuel Pick Up Tubing

SECTION 5 Rigid Tube and Fittings

SECTION 6 Accessories

TECHNICAL INFORMATION
Hose Assembly Length and Orientation Measurement TI.1
Assembly Procedure
ProGold AR Reusable Fittings TI.2
Smooth Bore PTFE Reusable Fittings TI.3
Rigid Tube and Fittings TI.4
Hose End Fitting – Torque Tightening Values TI.5
Fitting Thread Sizes TI.6
‘O’ Ring Material – Selection Guide TI.7
Pressure Units Cross Reference Chart TI.8

CONTACTS

Contact: USA Tel: (704) 793-4319, UK Tel:+44 (0) 1753 545554.

Brown and Miller Racing Solutions offers custom design and manufacturing service for fittings. Many designs are possible. Please contact any of our locations with your specialized needs
© Brown & Miller Racing Solutioins 2006